AASHTO, NCHRP and ASTM
AASHTO TP46 Resilient modulus of base and subbase materials (soil, gravel, aggregate).
AASHTO T307 Resilient modulus of base and subbase materials (soil, gravel, aggregate).
NCHRP 1-28A Resilient Modulus of Unstabilized Aggregate Base and Subgrade Materials
ASTM 2850 Unconsolidated, undrained compressive strength of cohesive soils in triaxial compression.
ASTM 3999 Determination of the modulus and damping of soils using a triaxial cell.
ASTM 4767 Consolidated undrained triaxial compression test on cohesive soils.
ASTM 5311 Load controlled cyclic strength of soils (Soils Liquifaction).
Used to Perform:
AASHTO TP46
AASHTO T307
.jpg)
Used to Perform:
NCHRP 1-28A
ASTM 28502
ASTM 39992
ASTM 47672
ASTM 53113
1External can be either wrap or platen to platen lvdt’s.
2Platen to platen are stated in the test standard for deformation devices.
3Uses stroke for measurement
|
|
Axial and Diameteral Strain Measurement
When testing cylindrical specimens of soil or asphalt, axial diameteral deformations can be measured at the center of the specimen, away from end effects introduced by the loading platens. This enables accurate determination of modulus and Poisson’s ratio. Standard size ranges of 2.8 to 6 inches plus metric sizes are available.
Triaxial Cells
Interlaken’s universal system for soils and asphalt can be used with a wide variety of triaxal cells. It will easily interface with triax cells from several different manufacturers and suppliers as well as Interlaken's large diameter triaxial cell.
Platen to Platen LVDT's
Interlaken's platen to platen lvdt's are typically used with very soft and unstable soil samples.
|
Soils & Asphalt Test System
Asphalt testing
Machine Specifications
UniTest Control System |
